2732A-2) Maximum Access m Low Current Requirement Time ... HMOS*-E Technology 100 mA Active = Compatible with High-Speed 35 mA Standby Microcontrollers and Microprocessors g@ inteligent Identifier Mode ... Zero WAIT State ~ Automatic Programming Operation @ Two Line Control m Industry Standard Pinout ... JEDEC m 10% Vcc Tolerance Available Approved 24 Pin Ceramic Package (See Packaging Spec. Order # 231369) The Intel 2732A is a 5V-only, 32,768-bit ultraviolet erasable (cerdip) Electrically Programmable Read-Only Memory (EPROM). The standard 2732A access time is 250 ns with speed selection (2732A-2) available at 200 ns. The access time is compatible with high performance microprocessors such as the 8 MHz iAPX 186. in these systems, the 2732A allows the microprocessor to operate without the addition of WAIT states. An important 2732A feature is Output Enable (OE) which is separate from the Chip Enable (CE) control. The OE control eliminates bus contention in microprocessor systems. The
32-1 AND | ox70| 350 of 360[ too] 455.5 150/30| 0.8) 20) 6{ 0.45/21 2.4/0.4| 12 | An2732-2 AMD o~70 | 450 of 450] 100) 45455 150/30] 0.8] 20| 6] 0.45/21 2.4/0.4] 12 | An27 324-2006 AND o~70 | 200 of mo] so) 45~55 100725] 0.8| 20] 6] 0.45/21 2.4/0.4| 12 | n2732A-250C AMD o~70 | 250 [oj wo! so) 45~55 1o025| 08] 20] 6| 0.45/21 2.4/0.4) 12 | An2732A-206 AMD o~70 | 200 of 70] 60] 45~55 100/25 { 0. = 0. 45/2.1 24/0.4| 12 _ An2732A-300C AND o~70 | 300 o[ iso) 130, 45~5.5 10/25 0.8] 20] 6[ 0.45/21 2.4/0.4 12 An27324-30C AMD o~70 | 300 of iso} 10. 45455 woes{ 08] 20] 6| 045/21 2.4/0.4] 12 | An2792A-45D AND a~70 | 450 of iso] 130[ 45455 1072s; 0.8] 20] 6| 0.45/21 2.4/0.4] 12 _| An2732A-ADC AND t~70 | 450 a| 190] 190) 4.5~5.5 100/25] oa] 20, 6{ 0.45/21 rl a An2732A-DC AMD o~70 [250 of tof so; 45~5.5 wov25{ as] 20] 6{ 045/21 247.4{ 12 | AmZ7I2APC AMD o~70 [250 of] wo] sof 45~5.5 100/25] 08] 20/ 6] 0.45/21 24/04] 12 62732 INTEL o~70] 450} 120[ 0 100] 4. 75~5. 25 150/30, 08) 20] 6| 0.45/21 2.4/-|_
2732A-20 200 ns TMS2732A-25 250 ns TMS2732A-45 450 ns @ Low Standby Power Dissipation . . . 158 mW (Maximum) @ JEDEC Approved Pinout . . . Industry Standard @ 21-V Power Supply Required for Programming AUGUST 1983 REVISED NOVEMBER 19385 J PACKAGE (TOP VIEW) 471 U2 vec a6 []2 73H ae 453 220] a9 aoe aitjait a3 (5 79H Sivee A2[}s is{} aro aifi7 islje& aos 17[C)a8 ai[j9 16[Ja7 o2[i0 15[ Jas o3(]11 140 05 Gno(ji2 13f} a4 @ N-Channel Silicon-Gate Technology PIN NOMENCLATURE @ PEP4 Version Available with 168 Hour AO-A11 Burn-in and Guaranteed Operating E Temperature Range from 10C to 85C G/Vpp (TMS2732A-__JP4) GND 21-08 description Vee Address Inputs Chip Enable Output Enable/21 V Ground Outputs 5-V Power Supply The TMS2732A is an ultraviolet light-erasable, electrically programmable read-only memory. It has 32,768 bits organized as 4,096 words of 8-bit length. The TMS2732A only requires a single 5-volt power supply with a tolerance of +5%. The TMS2732A provides two output control lines: Ou
2732A-2) Maximum Access a Industry Standard Pinout... JEDEC Time... HMOS*-E Technology Approved = Compatible with High-Speed 8mHz Low Standby Current...30 mA Maximum iAPX 186...Zero WAIT State = Two Line Control Compatible with 12 MHz 8051 Family = +10% Vcc Tolerance Available intgligent Identifier Mode a TTL Compatible The Intel 2732A is a 5V only, 32,768 bit ultraviolet erasable and electrically programmable read-only-memory (EPROM). The standard 2732A access time is 250 ns with speed selection (2732A-2) available at 200 ns. The access time is compatible with high performance microprocessors such as the 8 MHz iAPX 186. In these systems, the 2732A allows the microprocessor to operate without the addition of WAIT states. An important 2732A feature is the separate output control, Output Enable (OE), from the Chip Enable con- trol (CE). The OE control eliminates bus contention in microprocessor systems. Intels Application Note AP-72 describes the microprocessor system implementation of
e Available mode reduces the current requirement by 65%; the maximum active current is reduced from standby current of 35 mA. *HMOS is a patented process of intel Corporation. 35 mA Standby inteligent Identifier Mode 32K (4K x 8) UV ERASABLE PROMS 200 ns (2732A-2) Maximum Access m Low Current Requirement 100 mA Active ~ Automatic Programming Operation industry Standard Pinout... JEDEC Approved 24 Pin Ceramic Package (See Packaging Spec. Order #231369) The intel 2732A is a 5V-only, 32,768-bit ultraviolet erasable (cerdip) Electrically Programmable Read-Only Memory (EPROM). The standard 2732A access time is 250 ns with speed selection (2732A-2) available at 200 ns. The access time is compatible with high performance microprocessors such as the 8 MHz iAPX 186. In these systems, the 2732A allows the microprocessor to operate without the addition of WAIT states. An important 2732A feature is Output Enable (GE) which is separate from the Chip Enable (CE) control. The OE control eliminates
2732A-25) Maximum Access a Industry Standard Pinout ... JEDEC Time ... HMOS* -E Technology Approved w Compatible to High Speed 5 MHz w Two Line Control MiAPX 86/10 MPU ... Zero Wait State w Low Standby Current... 35 mA Max. w Military Temperature Range: 55C to + 125C (Tc) The Intel M2732A is a 5V only, 32,768 bit ultraviolet erasable and electrically programmable read-only memory (EPROM). The standard M2732As access time is 450 ns with speed selection (M2732A-25) available at 250 ns. The access time is compatible to high performance microprocessors, such as the 5 MHz MiAPX 86/10. In these systems, the M2732A allows the microprocessor to operate without the addition of WAIT states. An important M2732A feature is the separate output control, Output Enable (OE), from the Chip Enable control (GE). The OE control eliminates bus contention in multipte bus microprocessor systems. Intel's Application Note AP-72 describes the microprocessor system implementation of the OE and CE controls on I
2732A-20 200 ns TMS2732A-25 250 ns TMS2732A-45 450 ns All Inputs/Outputs Fuly TTL Compatible @ Low Standby Power Dissipation .. . 158 mW (Maximum) @ JEDEC Approved Pinout... Standard @ 21-V Power Supply Required for Programming @ N-Channel Silicon-Gate Technology @ PEP4 Version Available with 168 Hour Burn-in, and Extended Guaranteed Operating Temperature Range from 10C to 85C (TMS2732A-_ _JP4) description Industry AUGUST 1983REVISED FEBRUARY 1988 J PACKAGE (TOP VIEW) A7(]1 V2aQ vec A6qj2 230s as(j3 22Djag A4f]4 21f}ait A3(]5 20f]G/vpp A2(]6 Bia AiQ77 18DE Aot}s 1708 aifj9 16fja7 Q2[j10 15)[Ja6 o3{]11 14705 GND (J12 130} 04 PIN NOMENCLATURE A0-A11 E Gvpp GND Q1-08 Vec Address Inputs Chip Enable Output Enable/21 V Ground Outputs 5-V Power Supply EPROMs/PROMs/EEPROMs The TMS2732A is an ultraviolet light-erasable, electrically programmable read-only memory. it has 32,768 bits organized as 4,096 words of 8-bit length. The TMS2732A only requires a single 5-volt power supply with a toleran
ndby CE=Vin OE = Vi 35 mA lece | Vee Current Active CE = OE = Vit 70 125 mA Vit Input low voltage -0.1 +0.8 Vv ViH Input high voltage 2.0 Vec+ 1 Vv VoL Output Low voltage lo. = 2.1 mA 0.45 Vv Vou Output high voltage loH = -400 pA 2.4 Vv AC CHARACTERISTICS 2732A-2 2732A 2732A-3 2732A-4 Symbol Parameter Covttion 2732A-20 2732A-25 2732A-30 2732A-45 Unit Min | Max | Min | Max | Min | Max | Min | Max taco | Address to Output | CE_GE=Vvi. 200 250 300 450 | ns Delay tce CE to Output delay | OE=Vit 200 250 300 450 ns tor OE to Output Delay! CE=ViL 100 100 150 150 ns tor) | OF High to Output SEV se | o 6 o | 130 | 0 | 130 ns Output hold from__ address, CE or OE | ae_ae_ toH | Whichever occured | CE=OE=Vin 0 0 0 ns first CAPACITANCE (Tams = 25C, f = 1 MHz) Symbol! Parameter Test Condition Min Typ Max Unit Input Capacitance except _ Cin OEVer Vin = OV 4 6 pF Cine OE/Vpe Input Capacitance Vin = OV , 20 pF Court Output Capacitance Vout = OV 8 12 pF NOTES : 1. Vcc must be applied simu
RE MINIMUM TIMES AND ARE NSEC UNLESS OTHERWISE SPECIFIED. 3. OE MAY BE DELAYED UP TO tacc ~ toe AFTER THE FALLING EDGE OF CE WITHOUT IMPACT ON tacc. 4. top IS SPECIFIED FROM OE OR CE, WHICHEVER OCCURS FIRST. 2-92732A 32K (4K x 8) UV ERASABLE PROM @ 200ns (2732A-2) Maximum Access @ Pin Compatible to 2764 EPROM Time ... HMOS*-E Technology Compatible to High Speed 8mHz o dustry Standard Pinout .. . JEDEC 8086-2 MPU .. .Zero WAIT State pprove @ Two Line Control @ Low Standby Current ... 35mA Max. The Intel 2732A is a 5V only, 32,768 bit ultraviolet erasable and electrically programmable read-only memory (EPROM). It is pin compatible to Intels 450ns 2732. The standard 2732As access time is 250ns with speed selection (2732A-2) available at 200ns. The access time is compatible to high performance microprocessors, such as the 8mHz 8086-2. In these systems, the 2732A allows the microprocessor to operate without the addition of WAIT states. An important 2732A feature is the separate output con
MK4801AJ-90 AM9ol6EPc AM9016FPC Tms4o44-45NL Amgo16DPC D2148HL IM66531JG TMS2564JL SELECTED RM4864-3 TMS2532-35JL D2147H-1 HM6116P-3 MK4801AN-90 L8114-4ci D2732A P2114AL-2 Mt4802N-3 D2732A HM6147P MK4802N-1 D2732A tmm6ll6LP-4 02764 IM65x61ACPN Mcm68BLoP D2732A-2 MM2102AJ-6L HPPIN 1818-1757 1818-1758 1818-1768 1818-1774 1818-1775 1818-1776 1818-1784 1818-1785 1818-1790 1818-1813 1818-1814 1818-1822 1818-1824 1818-1845 1818-1877 1818-1887 1818-1888 1818-1960 1818-1966 1818-1967 1818-1968 1818-1969 1818-1974 1818-1981 1818 198P 1818-1985 1818-1998 1818-1999 1818-2702 1818-3005 1818-3006 1818-3013 1818-3021 1818-3022 1818-3023 1818-3044 1818-3052 1818-3059 1818-3076 1818-3118 1818-3136 187.8-3138 1818-3154 1818-3159 1818-3160 1818-3162 1818-3163 1818-3164 1818-3165 1818-3166 1818-3172 1818-3174 1818-3181 1818-3183 1818-3184 1818-3185 1818-3186 1818-3197 1878-3198 1818-3214 1818-3220 1818-3222 1818-3229 1818-328C 1818-3298 1818-3302 1818-3303 1818-3305 1818-3307 1818-3308 1818-3309 1818-3310 1818-331
ccess Time Act St.by ET2716Q ET2716Q-1 M2716F1 M2716-1F1 M2716F6 M2716-1F6 2Kx8 2Kx8 2Kx8 2Kx8 2Kx8 2Kx8 450n5 350n5 450n5 350n5 450n5 350n5 100mA 100mA 100mA 100mA 100mA 100mA 25mA 25mA 25mA 25mA 25mA 25mA 5V 5V 5V 5V 5V 5V 5% 10% 5% 10% 5% 10% M2732AF1 M2732A-2F1 M2732A"3F1 M2732A-4F1 M2732AF6 M2732A-4F6 4Kx8 4Kx8 4Kx8 4Kx8 4Kx8 4Kx8 250115 200n5 300n5 450n5 250n5 450n5 125mA 125mA 125mA 125mA 125mA 125mA 35mA 35mA 35mA 35mA :35mA 35mA 5V 5V 5V .5V 5V 5V . 5% 5% 5% 5% 5% 5% 8Kx8 8Kx8 8Kx8 8Kx8 8Kx8 8Kx8 8Kx8 8Kx8 8Kx8 8Kx8 8Kx8 8Kx8 250n5 180n5 200n5 300n8 450n5 180n5 200n5 250n5 300n5 450n5 250n5 450n8 75mA 75mA 75mA 75mA 75mA .* 75mA 75mA 75mA 75mA 75mA 75mA 75mA 35mA 35mA 35mA 35mA 35mA 35mA 35mA 35mA 35mA 35mA 35mA 35mA 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5% 5% 5% 5% 5% 10% 100/0 10% 10% 10% 5% 5% M27128AF1 M27128A-1 F1 M27128A-2F1 M27128A-3F1 M27128A-4F1 M27128A-20F1 M27128A-25F1 M27128A-30F1 M27128A-45F1 M27128AF6 M27128A-4F6 16Kx8 16Kx8 16Kx8 16Kx8 16Kx8 16Kx8 16Kx8 16KxB 16Kx8 16Kx8 16K
125C Type Organization (ns) Supply (C) (hr) Q02716-1 2048x8 350 5V + 10% 0 to 70 168+8 QD2716-2 2048x8 390 5V + 5% 0 to 70 168+8 QD2716 2048x8 450 5V + 5% 0 to 70 168+8 LB2716 2048x8 . 450 5V + 5% -40 to 85 168+8 TD2716 2048x8 450 5V = 5% -40 to 85 NONE QD2732A-2 4096x8 200 5V + 5% 0 to 70 168+8 QD2732A 4096x8 250 5V + 5% 0 to 70 168+8 QD2732A-3 . 4096x8 300 5V + 5% 0 to 70 1688 Q0D2732A-4 4096x8 450 5V + 5% 0 to 70 168+8 QD2732A-20 4096x8 200 5V + 10% - Qto 70 1688 QD2732A-25 4096x8 250 SV + 10% 0 to 70 168+8 QD2732A-30 4096x8 300 5V + 10% 0 to 70 168+8 LD2732A 4096x8 250 5V = 5% ~40 to 85 168+8 LD2732A-4 4096x8 450 5V + 5% ~40 to 85 168+8 L02732A-25 4096x8 250 5V + 10% - 40 to 85 168+8 LD2732A-45 4096x8 450 5V + 10% -40 to 85 168+8 1D2732A 4096x8 250 5V + 5% -40 to 85 NONE TO2732A-4 4096x8 450 5V + 5% -40 to 85 NONE T02732A-25 4096x8 250 5V + 10% -40 to 85 NONE TD2732A-45 4096x8 450 5V + 10% ~40 to 85 NONE QD2764-2 8192x8 200 5V + 5% 0 to 70 1
2732A-20 200 ns TMS2732A-25 250 ns TMS2732A-45 450 ns All Inputs/Outputs Fuly TTL Compatible @ Low Standby Power Dissipation .. . 158 mW (Maximum) @ JEDEC Approved Pinout... Standard @ 21-V Power Supply Required for Programming @ N-Channel Silicon-Gate Technology @ PEP4 Version Available with 168 Hour Burn-in, and Extended Guaranteed Operating Temperature Range from 10C to 85C (TMS2732A-_ _JP4) description Industry AUGUST 1983REVISED FEBRUARY 1988 J PACKAGE (TOP VIEW) A7(]1 V2aQ vec A6qj2 230s as(j3 22Djag A4f]4 21f}ait A3(]5 20f]G/vpp A2(]6 Bia AiQ77 18DE Aot}s 1708 aifj9 16fja7 Q2[j10 15)[Ja6 o3{]11 14705 GND (J12 130} 04 PIN NOMENCLATURE A0-A11 E Gvpp GND Q1-08 Vec Address Inputs Chip Enable Output Enable/21 V Ground Outputs 5-V Power Supply EPROMs/PROMs/EEPROMs The TMS2732A is an ultraviolet light-erasable, electrically programmable read-only memory. it has 32,768 bits organized as 4,096 words of 8-bit length. The TMS2732A only requires a single 5-volt power supply with a toleran
on Pin (W) No. 24 3m 28 5p/0.05 28 6500 +5 HN613128 16384 X 8 HN61256 32768x 8 65536X 4 3500 7.5m HN613256 32768 8 250 5p/75m 1M-bit HN62301** 131072 X 8 350 5m/60m 28 16k-bit HN462716 2048 X 8 450 0.555 24 X 250 28 HN462532 0.858 450 HN462732 32k-bit HN482732A-25 u. V. Erasable & - HN482732A-20 4096 X 8 NMOS - - 128k-bit +5 8192 X 8 300 - HN482764-4 450 HN4827128-25** 250 NMOS 16384 X 8 300 - HN4827128-45** Electrically Erasable * ** *** 16k-bit HN48016 0.555 28 0.554 28 0.16 24 450 NMOS 16384 X 8 350 +5 P FP * * * * * * * * * * * * * * * * * * * ment Page 292 294 296 298 * 300 * * 302 304 306 * 250 - * * * * * * * * 0.788 300 HN482764-3 HN4827128-30** 24 250 - HN482764 64k-bit 0.788 200 HN482732A-30 Electrically G 5p/0.05 CMOS 256k-bit C 28 250 I--8192 X 8 250 I--250 HN61366 Mask Time (word) Xbit HN61364 64k-bit Acces~ zation Process 2716 310 TMS2532 314 2732 318 2732A-2 325 2732A 325 2732A-3 325 2764 328 2764-3 328 328 332 332 332 * 336 Under development Preliminary T
2732A-2) Maximum Access @ Pin Compatible to 2764 EPROM Time ... HMOS*-E Technology Compatible to High Speed 8mHz o dustry Standard Pinout .. . JEDEC 8086-2 MPU .. .Zero WAIT State pprove @ Two Line Control @ Low Standby Current ... 35mA Max. The Intel 2732A is a 5V only, 32,768 bit ultraviolet erasable and electrically programmable read-only memory (EPROM). It is pin compatible to Intels 450ns 2732. The standard 2732As access time is 250ns with speed selection (2732A-2) available at 200ns. The access time is compatible to high performance microprocessors, such as the 8mHz 8086-2. In these systems, the 2732A allows the microprocessor to operate without the addition of WAIT states. An important 2732A feature is the separate output control, Output Enable (OE), from the Chip Enable control (CE). The OE control eliminates bus contention in multiple bus microprocessor systems. Intels Application Note AP-72 describes the microprocessor system implementation of the OE and CE controls on Inte