MOC8020/D WZ GlobalOptoisolator VDE | UL | CSA | SETI | SEMKO| DEMKO | NEMKO| BABT MOC8020 [CTR = 500% Min] 6-Pin DIP Optoisolators MOC8021 Darlington Output feTR = 1000%% min (No Base Connection) The MOC8020 and MOC8021 devices consist of a gallium arsenide infrared STYLE 3 PLASTIC emitting diode optically coupled to a monolithic silicon photodarlington detector. The chip to Pin 6 base connection has been eliminated to improve the devices output performance in higher noise environments. e No Base Connection for Improved Noise Immunity e Higher Sensitivity to Low Input Drive Current To order devices that are tested and marked per VDE 0884 requirements, the suffix V must be included at end of part number. VDE 0884 is a test option. STANDARD THRU HOLE Applications CASE 730A-04 e Appliances, Measuring Instruments e |/O Interfaces for Computers e Programmable Controllers e Portable Electronics SCHEMATIC e Interfacing and coupling systems of different potentials and impedance

MOC8020 DESCRIPTION MOC8021 PACKAGE DIMENSIONS The MOC8020 and MOC8021 are photodarlington-type optically coupled optocouplers. The devices have a gallium arsenide infrared emitting diode coupled with a silicon darlington phototransistor. PIN 1 ID. 0.270 (6.86) 0.240 (6.10) * High current transfer ratio 6 -500% (MOC8020) -1000% (MOC8021) * No base connection for improved noise immunity * Underwriters Laboratory (UL) recognized File# E90700 SEATING PLANE FEATURES 1 0.350 (8.89) 0.330 (8.38) 0.070 (1.78) 0.045 (1.14) 0.200 (5.08) 0.115 (2.92) APPLICATIONS * * * * * Appliances, measuring instruments I/O interface for computers Programmable controllers Portable electronics Interfacing and coupling systems of different potentials and impedance * Solid state relays ANODE 1 6 N/C 0.020 (0.51) MIN 0.154 (3.90) 0.100 (2.54) 0.016 (0.40) 0.008 (0.20) CATHODE 2 0.022 (0.56) 0.016 (0.41) 5 COLLECTOR 0.300 (7.62) TYP 0 to 15 0.100 (2.54) TYP N/C 3 ABSOLUTE MAXIMUM RATINGS 4 EMITTER N

MOC8020/D VDE UL CSA SETI | SEMKO | DEMKO | NEMKO | BABT GlobalOptoisolator 6-Pin DIP Optoisolators Darlington Output (No Base Connection) The MOC8020 and MOC8021 devices consist of a gallium arsenide infrared emitting diode optically coupled to a monolithic silicon photodarlington detector. The chip to Pin 6 base connection has been eliminated to improve the devices output performance in higher noise environments. e No Base Connection for Improved Noise Immunity e Higher Sensitivity to Low Input Drive Current To order devices that are tested and marked per VDE 0884 requirements, the suffix V must be included at end of part number. VDE 0884 is a test option. Applications e Appliances, Measuring Instruments e |/O Interfaces for Computers e Programmable Controllers e Portable Electronics e Interfacing and coupling systems of different potentials and impedances e Solid State Relays e Circuits Exposed to High Noise Environments MAXIMUM RATINGS (Tz = 25C unless otherwise noted) Rating | S

C3063M MOC3063SR2VM MOC3063TVM MOC3081FR2M MOC3081M MOC3081SR2VM MOC3081TVM MOC3082FR2M MOC3082M MOC3082SR2VM MOC3082TVM MOC3083FR2M MOC3083M MOC3083SR2VM MOC3083TVM MOC3162FR2M MOC3162M MOC3162SR2VM MOC3162TVM MOC3163FR2M MOC3163M MOC3163SR2VM MOC3163TVM MOC8020300 MOC80203SD MOC8020W MOC8021300W MOC8021S MOC8030 MOC80303S MOC8030SD MOC8050300 MOC80503SD MOC8050W MOC8080300W MOC8080S MOC8100FM MOC8100FVM MOC8100SR2M MOC8100TM MOC3051FR2VM MOC3051SM MOC3051SVM MOC3051VM MOC3052FR2VM MOC3052SM MOC3052SVM MOC3052VM MOC3061FR2VM MOC3061SM MOC3061SVM MOC3061VM MOC3062FR2VM MOC3062SM MOC3062SVM MOC3062VM MOC3063FR2VM MOC3063SM MOC3063SVM MOC3063VM MOC3081FR2VM MOC3081SM MOC3081SVM MOC3081VM MOC3082FR2VM MOC3082SM MOC3082SVM MOC3082VM MOC3083FR2VM MOC3083SM MOC3083SVM MOC3083VM MOC3162FR2VM MOC3162SM MOC3162SVM MOC3162VM MOC3163FR2VM MOC3163SM MOC3163SVM MOC3163VM MOC8020300W MOC8020S MOC8021 MOC80213S MOC8021SD MOC8030300 MOC80303SD MOC8030W MOC80503

T2713S MCT271SD MCT2E300 MCT2E3SD MCT2EW MCT2W MCT5200300W MCT5200S MCT5201 MCT52013S MCT5201SD MCT5210300 MCT52103SD MCT5210W MCT5211300W MCT5211S MCT6 MCT61SD MCT62S MCT66 MCT6W MCT9001SD MOC119300 MOC1193SD MOC119W MOC3011SD MOC3021 MOC3023300 MOC3023S MOC8020300 MOC80203SD MOC8020W MOC8021300W MOC8021S MCT210300 MCT2103SD MCT210W MCT2200300W MCT2200S MCT2201 MCT22013S MCT2201SD MCT2202300 MCT22023SD MCT2202W MCT23S MCT271300 MCT2713SD MCT271W MCT2E300W MCT2ES MCT2S MCT5200 MCT52003S MCT5200SD MCT5201300 MCT52013SD MCT5201W MCT5210300W MCT5210S MCT5211 MCT52113S MCT5211SD MCT61 MCT61W MCT62SD MCT6S MCT9001 MCT9001W MOC119300W MOC119S MOC3010 MOC3012 MOC3022 MOC3023300W MOC3023SD MOC8020300W MOC8020S MOC8021 MOC80213S MOC8021SD MCT210300W MCT210S MCT2200 MCT22003S MCT2200SD MCT2201300 MCT22013SD MCT2201W MCT2202300W MCT2202S MCT2300 MCT23SD MCT271300W MCT271S MCT2E MCT2E3S MCT2ESD MCT2SD MCT5200300 MCT52003SD MCT5200W MCT5201300W MCT5201S MCT5

MOC8020 DESCRIPTION MOC8021 PACKAGE DIMENSIONS The MOC8020 and MOC8021 are photodarlington-type optically coupled optocouplers. The devices have a gallium arsenide infrared emitting diode coupled with a silicon darlington phototransistor. PIN 1 ID. 0.270 (6.86) 0.240 (6.10) * High current transfer ratio 6 -500% (MOC8020) -1000% (MOC8021) * No base connection for improved noise immunity * Underwriters Laboratory (UL) recognized File# E90700 SEATING PLANE FEATURES 1 0.350 (8.89) 0.330 (8.38) 0.070 (1.78) 0.045 (1.14) 0.200 (5.08) 0.115 (2.92) APPLICATIONS * * * * * Appliances, measuring instruments I/O interface for computers Programmable controllers Portable electronics Interfacing and coupling systems of different potentials and impedance * Solid state relays ANODE 1 6 N/C 0.020 (0.51) MIN 0.154 (3.90) 0.100 (2.54) 0.016 (0.40) 0.008 (0.20) CATHODE 2 0.022 (0.56) 0.016 (0.41) 5 COLLECTOR 0.300 (7.62) TYP 0 to 15 0.100 (2.54) TYP N/C 3 ABSOLUTE MAXIMUM RATINGS 4 EMITTER N

MOC8020 MOC8021 DESCRIPTION PACKAGE DIMENSIONS The MOC8020 and MOC8021 are photodarlington-type optically coupled optocouplers. The devices have a gallium arsenide infrared emitting diode coupled with a silicon darlington phototransistor. PIN 1 ID. 0.270 (6.86) 0.240 (6.10) * High current transfer ratio 6 -500% (MOC8020) -1000% (MOC8021) * No base connection for improved noise immunity * Underwriters Laboratory (UL) recognized File# E90700 SEATING PLANE FEATURES 1 0.350 (8.89) 0.330 (8.38) 0.070 (1.78) 0.045 (1.14) 0.200 (5.08) 0.115 (2.92) APPLICATIONS * * * * * Appliances, measuring instruments I/O interface for computers Programmable controllers Portable electronics Interfacing and coupling systems of different potentials and impedance * Solid state relays ANODE 1 6 N/C 0.020 (0.51) MIN 0.154 (3.90) 0.100 (2.54) 0.016 (0.40) 0.008 (0.20) CATHODE 2 0.022 (0.56) 0.016 (0.41) 5 COLLECTOR 0.300 (7.62) TYP 0 to 15 0.100 (2.54) TYP N/C 3 ABSOLUTE MAXIMUM RATINGS 4 EMITTER N

MOC8020 and MOC8021 devices consist of a gallium arsenide infrared emitting diode optically coupled to a monolithic silicon photodarlington detector. No Base Connection for Improved Noise Immunity High Sensitivity to Low Input Drive Current Applications e Appliances, Measuring Instruments * I/O interfaces for Computers e Programmabie Controllers e Portable Electronics MAXIMUM RATINGS (Ta = 25C unless otherwise noted) @ Interfacing and coupling systems of different potentials and impedances Solid State Relays MOC8020 [CTR = 500% Min} MOCS8021 [CTR = 1000% Min} STYLE 3 PLASTIC STANDARD THAU HOLE CASE 730A-04 T" LEADFORM WIDE SPACED 0.4 CASE 7300-05 S"/F" LEAOFORM SURFACE MOUNT CASE 730C-04 (STANDARD PROFILE) Ze CASE 730F-04 (LOW PROFILE) Rating [ symboi [ value unit INPUT LED Reverse Voltage VR 3 Volts Forward Current Continuous IF 60 mA LED Power Dissipation @ Ta = 25C Pp 120 mw with Negligible Power in Output Detector Derate above 25C 1.41 mw OUTPUT DETECTOR Collector-Emitter Voltage

ge Tstg ~55 to +150 C 5. COLLECTOR 6.NC Soldering Temperature (10 seconds, 1/16 from case} _ 260 Cc {1} Isolation surge voltage is an internal device dielectric breakdown rating. For this test, Pins 1 and 2 are common, and Pins 4, 5 and 6 are common. 6-116MOC8020, MOC8021 ELECTRICAL CHARACTERISTICS (Tp = 25C unless otherwise noted) Characteristic | Symbol | Min | Typ Max l Unit | INPUT LED Reverse Leakage Current Ir _ 0.05 10 BA (VR = 3V) Forward Voltage Ve ~ 4.15 2 Volts (Ip = 10 mA) Capacitance Cc 18 _ pF (VR = OV, f = 1 MHz) PHOTODARLINGTON (Ta = 25C and !f = 0, unless otherwise noted} Collector-Emitter Dark Current IcEO _ ~ 100 nA (Vce = 10 V) Collector-Emitter Breakdown Voltage VIBRICEO 50 _ _ Volts (Ic = 1 mA) Emitter-Collector Breakdown Voltage ViBRIECO 5 ~ _ Vaits (Ig = 100 pA) COUPLED (Ta = 25C unless otherwise noted) Collector Output Current Ic mA (Vce = 5V, Ip = 10 mA) MOC8020 50 ~ MOC8021 100 _ _ Isolation Surge Voltage {1, 2), 60 Hz Peak ac, 1 Second Vviso 7500 _ _ Volts

MOC8020/D SEMICONDUCTOR TECHNICAL DATA GlobalOptoisolator [CTR = 500% Min] ! ! ! "!"! ! [CTR = 1000% Min] The MOC8020 and MOC8021 devices consist of a gallium arsenide infrared emitting diode optically coupled to a monolithic silicon photodarlington detector. The chip to Pin 6 base connection has been eliminated to improve the device's output performance in higher noise environments. * No Base Connection for Improved Noise Immunity * Higher Sensitivity to Low Input Drive Current * To order devices that are tested and marked per VDE 0884 requirements, the suffix "V" must be included at end of part number. VDE 0884 is a test option. Applications * Appliances, Measuring Instruments * I/O Interfaces for Computers * Programmable Controllers * Portable Electronics * Interfacing and coupling systems of different potentials and impedances * Solid State Relays * Circuits Exposed to High Noise Environments MAXIMUM RATINGS (TA = 25C unless otherwise noted) Rating STYLE 3 PLASTIC 6 1 STANDARD TH

MOC8020 and MOC8021 devices consist of a gallium arsenide infrared emitting diode optically coupled to a monolithic sillcon photodarlington detector. The chip to Pin.6 base connection has been eliminated to improve the devices output performance in higher noise environments. * No Base Connection for Improved Noise Immunity Higher Sensitivity to Low Input Drive Current To order devices that are tested and marked per VDE 0884 requirements, the suffix "V must be Included at end of part number. VDE 0884 Is a test option. Applications e Appliances, Measuring Instruments e I/O Interfaces for Computers e Programmable Controllers e Portable Electronics e Interfacing and coupling systems of different potentials and impedances e Solid State Relays Circuits Exposed to High Noise Environments MAXIMUM RATINGS (Ta 25C unless otherwise noted) Rating | Symbol | Value | Unit | INPUT LED Reverse Voltage VR 3 Voits Forward Current Continuous IF 60 mA LED Power Dissipation @ Ta = 25C Pp 120 mw with Negliglble Power

MOC8020 6-Pin DIP Optoisolators MOC8021 Darlington Output Each device consists of a gallium arsenide infrared emitting diode optically coupled to a monolithic silicon photodarlington detector. 6-PIN DIP They are designed for use in applications requiring high sensitivity at tow input OPTOISOLATORS currents. DARLINGTON Convenient Plastic Dual-In-Line Package OUTPUT @ High Sensitivity to Low Input Drive Current @ High Input-Output Isolation Guaranteed 7500 Volts Peak e e UL Recognized. File Number 54915 VDE approved per standard 0883/6.80 (Certificate number 41853), with additional approval to DIN IEC380/VDE0806, IEC435/VDE0805, [EC65/VDE0860, VDEO110b, covering all other standards with equal or less stringent requirements, including 1EC204/VDE0113, VDE0160, VDE0832, VDE0833, etc. 7 383 @ Special lead form available (add suffix T to part number) which satisfies VDE0883/ 6.80 requirement for 8 mm minimum creepage distance between input and output solder pads. Various lead form options available. Con

MOC8020, MOC8021 NON BASE LEAD OPTICALLY COUPLED ISOLATOR PHOTODARLINGTON OUTPUT APPROVALS l Dimensions in mm 2.54 UL recognised, File No. E91231 'X' SPECIFICATION APPROVALS l VDE 0884 in 3 available lead form : - STD - G form - SMD approved to CECC 00802 DESCRIPTION The MOC8020, MOC8021 series of optically coupled isolators consist of an infrared light emitting diode and NPN silicon photodarlington in a standard 6pin dual in line plastic package with the base pin unconnected. FEATURES l Options :10mm lead spread - add G after part no. Surface mount - add SM after part no. Tape&reel - add SMT&R after part no. l High Current Transfer Ratio (500% min) l BVceo 35V l High Isolation Voltage (5.3kVRMS ,7.5kVPK ) l Base pin unconnected for improved noise immunity in high EMI environment l High sensitivity to low input drive current l Custom electrical selections available APPLICATIONS l Computer terminals l Industrial systems controllers l Measuring instruments l Signal transmission between

MOC8020, MOC8021 NON BASE LEAD OPTICALLY COUPLED ISOLATOR PHOTODARLINGTON OUTPUT APPROVALS l Dimensions in mm 2.54 UL recognised, File No. E91231 'X' SPECIFICATION APPROVALS l VDE 0884 in 3 available lead form : - STD - G form - SMD approved to CECC 00802 DESCRIPTION The MOC8020, MOC8021 series of optically coupled isolators consist of an infrared light emitting diode and NPN silicon photodarlington in a standard 6pin dual in line plastic package with the base pin unconnected. FEATURES l Options :10mm lead spread - add G after part no. Surface mount - add SM after part no. Tape&reel - add SMT&R after part no. l High Current Transfer Ratio (500% min) l BVceo 35V l High Isolation Voltage (5.3kVRMS ,7.5kVPK ) l Base pin unconnected for improved noise immunity in high EMI environment l High sensitivity to low input drive current l Custom electrical selections available APPLICATIONS l Computer terminals l Industrial systems controllers l Measuring instruments l Signal transmission between

MOC8020, MOC8021 NON BASE LEAD OPTICALLY COUPLED ISOLATOR PHOTODARLINGTON OUTPUT l Dimensions in mm 2.54 APPROVALS UL recognised, File No. E91231 6.9 6.1 1 2 6 5 3 4 8.9 max. DESCRIPTION The MOC8020, MOC8021 series of optically coupled isolators consist of an infrared light emitting diode and NPN silicon photodarlington in a standard 6pin dual in line plastic package with the base pin unconnected. 8.3 max. 5.3 max. 1.4 0.9 2.54 min. 0.48 FEATURES l Options :10mm lead spread - add G after part no. Surface mount - add SM after part no. Tape&reel - add SMT&R after part no. l High Current Transfer Ratio (500% min) l High BVceo ( 50V ) High Isolation Voltage (5.3kVRMS ,7.5kVPK ) l Basepin unconnected for improved noise immunity in high EMI environment l High sensitivity to low input drive current l Custom electrical selections available APPLICATIONS l Computer terminals l Industrial systems controllers l Measuring instruments l Signal transmission between systems of different potentials a