| Product type designation | Reader RF685R ETSI |
| SIMATIC RF600 Reader RF685R ETSI; Interface Ethernet M12 PROFINET M12 1 integrated antenna+1 ext. antenna port, 4 dig. inputs/ 4 dig. outputs, 24V DC; IP65; -25 to +55 °C; without accessories |
| Suitability for operation | RF600 Transponder, for direct connection to Ethernet, PROFINET, Ethernet/IP or PROFIBUS via communication module, OPC UA server integrated |
| Wireless frequencies |
| Operating frequency | 865 ... 868 MHz |
| Transmit power | 3 ... 2000 mW |
| Effective radiant power | |
| for each external antenna / maximum | 2000 mW |
| minimum | 10 mW |
| maximum | 2000 mW |
| Range / maximum | 8 m; Extended ranges possible, see RF600 System Manual, Range table: http://support.automation.siemens.com/WW/view/en/67384964 |
| Protocol / with radio transmission | EPCglobal Class 1 Gen 2 / ISO/IEC 18000-62/-63 |
| Transfer rate / with radio transmission / maximum | 400 kbit/s |
| Product feature / multitag-capable | Yes |
| Polarization | Linear (h/v), circular, combined |
| Electrical data |
| Transmission time / for user data | |
| for write access / per byte / typical | 2 ms |
| for read access / per byte / typical | 0.15 ms |
| Interfaces |
| Number of external antennas | 1 |
| Type of electrical connection | |
| for external antenna(s) | RP-TNC |
| for supply voltage | M12, 8-pin, connector |
| for communications interface | 2 x M12 4-pin D-coded, M12 8-pin (RS422) |
| at the digital inputs/outputs | M12, 12-pin, female connector |
| Number of digital inputs | 4 |
| Number of digital outputs | 4 |
| Mechanical data |
| Material | Aluminum, Pocan |
| Color | silver, TI-Grey |
| Mounting distance / relating to metal surfaces / recommended / minimum | 0 mm |
| Supply voltage, current consumption, power loss |
| Supply voltage | |
| at DC / Rated value | 24 V |
| at DC | 20 ... 30 V |
| Consumed current / at DC / at 24 V | |
| typical | 0.38 A |
| maximum | 2 A |
| Permitted ambient conditions |
| Ambient temperature | |
| during operation | -25 ... +55 °C |
| during storage | -40 ... +85 °C |
| during transport | -40 ... +85 °C |
| Ambient condition / for operation | With operating temperature below -20 °C: Warming-up time at least 10 minutes |
| Protection class IP | IP65 |
| Shock resistance | EN 60068-2-27, EN 60068-2-6 |
| Shock acceleration | 500 m/s² |
| Vibrational acceleration | 200 m/s² |
| Resistance to mechanical stress | The maximum stress of shock and vibration acceleration is guaranteed only in combination with the VESA mount |
| Design, dimensions and weight |
| Width | 258 mm |
| Height | 258 mm |
| Depth | 80 mm |
| Net weight | 2.47 kg |
| Mounting type | Vesa 100 with 4 x M4 screws, top-hat rail 35 mm, profile rail S7-300, S7-1200 or S7-1500 |
| Wire length | |
| of antenna cable / minimum | 1 m |
| of antenna cable / maximum | 40 m |
| Product properties, functions, components / general |
| Display version | two LED rows with 8 and 9 LEDs |
| Protocol / is supported | |
| Media Redundancy Protocol (MRP) | Yes |
| LLDP | Yes |
| TCP/IP | Yes |
| SNMP v1 | Yes |
| SNMP v2 | No |
| SNMP v3 | No |
| DCP | Yes |
| EtherNet/IP protocol | Yes |
| Product feature / silicon-free | Yes |
| Standards, specifications, approvals |
| MTBF | 29 y |
| Accessories |
| accessories | one external antenna, set for mounting on top-hat rail or profile rail |
