| SIMATIC IOT2040, 2x 10/100 Mbit/s Ethernet RJ45; 1x USB2.0, 1x USB client; SD CARD slot; 24 V DC industrial power supply |
| Installation type/mounting |
| Design | IoT Gateway, built-in unit |
| Supply voltage |
| Type of supply voltage | 24 V DC (9 ... 36 V) |
| Mains buffering |
| Mains/voltage failure stored energy time | 5 ms |
| Processor |
| Processor type | Intel Quark X1020 |
| Drives |
| Hard disk | 1x microSD card slot |
| Memory |
| Type of memory | DDR3-SDRAM |
| Main memory | 1 GB |
| Capacity of main memory, max. | 1 Gbyte |
| Hardware configuration |
| Slots |
| free slots | 1x Arduino, 1x mPCIe |
| Interfaces |
| Number of industrial Ethernet interfaces | 2 |
| USB port | 1x USB 2.0, 1x USB client |
| Connection for keyboard/mouse | USB / USB |
| serial interface | 2x COM ports (RS 232, RS 485) |
| Industrial Ethernet |
| Industrial Ethernet interface | 2x Ethernet (RJ45) |
| — 100 Mbps | Yes |
| — 1000 Mbps | No |
| Integrated Functions |
| Monitoring functions |
| Temperature monitoring | No |
| Watchdog | Yes |
| Status LEDs | Yes |
| Fan | No |
| EMC |
| Interference immunity against discharge of static electricity |
| Interference immunity against discharge of static electricity | ±4 kV contact discharge acc. to IEC 61000-4-2; ±8 kV air discharge acc. to IEC 61000-4-2 |
| Interference immunity against high-frequency electromagnetic fields |
| Interference immunity against high frequency radiation | 10 V/m for 80 - 1 000 MHz, 80% AM acc. to IEC 61000-4-3; 3 V/m for 1.4 - 2 GHz, 80% AM acc. to IEC 61000-4-3; 1 V/m for 2 - 2.7 GHz, 80% AM acc. to IEC 61000-4-3; 10 V for 150 kHz - 80 MHz, 80% AM acc. to IEC 61000-4-6 |
| Interference immunity to cable-borne interference |
| Interference immunity on supply cables | ±2 kV acc. to IEC 61000-4-4, burst; ±1 kV acc. to IEC 61000-4-5, surge symmetric; ±2 kV acc. to IEC 61000-4-5, surge asymmetric |
| Interference immunity on signal cables >30m | ±2 kV acc. to IEC 61000-4-5, surge, length > 30 m |
| Interference immunity on signal cables < 30m | ±2 kV in accordance with IEC 61000-4-4, burst, length > 30 m |
| Interference immunity against voltage surge |
| asymmetric interference | ±2 kV acc. to IEC 61000-4-5, surge asymmetric |
| symmetric interference | ±1 kV acc. to IEC 61000-4-5, surge symmetric |
| Interference immunity to magnetic fields |
| Interference immunity to magnetic fields at 50 Hz | 100 A/m; to IEC 61000-4-8 |
| Emission of conducted and non-conducted interference |
| Interference emission via line/AC current cables | EN 61000-6-4:2007 +A1:2011 |
| Degree and class of protection |
| IP (at the front) | IP20 |
| Standards, approvals, certificates |
| Approval | CE (industry), UL, cULus |
| CE mark | Yes |
| UL approval | Yes |
| cULus | Yes |
| KC approval | Yes |
| EMC | CE, EN 61000-6-4:2007 +A1:2011, EN 61000-6-2:2005, EN 61000-6-3:2007 +A1:2011, EN 61000-6-1:2007 |
| Ambient conditions |
| Ambient temperature during operation |
| Ambient temperature during operation | 0 °C to 50 °C |
| Relative humidity |
| Relative humidity | Tested according to IEC 60068-2-78, IEC 60068-2-30: Operation: 5 % to 85 % at 30 °C (no condensation), storage / transport: 5 % to 95 % at 25 / 55 °C (no condensation) |
| Vibrations |
| Vibration resistance during operation acc. to IEC 60068-2-6 | Tested according to IEC 60068-2-6: 5 Hz to 9 Hz: 3.5 mm; 9 Hz to 200 Hz: 9.8 m/s² |
| Shock testing |
| Shock load during operation | Tested according to IEC 60068-2-27: 150 m/s², 11 ms |
| Operating systems |
| without operating system | Yes |
| Dimensions |
| Width | 144 mm |
| Height | 90 mm |
| Depth | 53 mm |
| last modified: | 03/29/2019 |
