| SITOP UPS8600 |
| SITOP UPS8600 UPS module for PSU8600 nominal voltage: DC 48 V buffer power: 960 W charging power: 120 W |
| Mains buffering |
| Type of energy storage | External battery module |
| Design of the mains power cut bridging-connection | Buffer time limit 1 ... 88 min. can be set with DIP switches or until the connected battery modules are discharged |
| Charging current | 1.25 A, 2.5 A |
| adjustable charging current maximum Note | Charging capacity 60 W/120 W, can be set with DIP switches |
| Output |
| Output voltage | |
| in normal operation at DC Rated value | 48 V |
| Property of the output Short-circuit proof | Yes |
| Supplied active power typical | 960 W |
| Efficiency |
| Efficiency in percent | |
| in case of accumulator operation typical | 99 % |
| Power loss [W] | |
| in case of accumulator operation typical | 10 W |
| Protection and monitoring |
| Product function | |
| reverse polarity protection against energy storage unit polarity reversal | Yes |
| Signaling |
| Display version | Three-color LED for operating state of module, three-color LED for status of battery circuit |
| for normal operation | LED green for "buffer standby exist" |
| in buffering mode | LED yellow for "buffered mode" |
| Interface |
| Design of the interface | Ethernet/PROFINET via power supply unit PSU8600 |
| Safety |
| Operating resource protection class | Class III |
| Certificate of suitability | |
| CE marking | Yes |
| as approval for USA | cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cCSAus (CSA C22.2 No. 60950-1, UL 60950-1) |
| relating to ATEX | IECEx Ex nA nC IIC T4 Gc; ATEX (EX) II 3G Ex nA nC IIC T4 Gc; cCSAus (CSA C22.2 No. 213, ANSI/ISA-12.12.01) Class I, Div. 2, Group ABCD, T4 |
| Type of certification CB-certificate | Yes |
| Shipbuilding approval | DNV GL and ABS in process |
| Protection class IP | IP20 |
| EMC |
| Standard | |
| for emitted interference | EN 55022 Class B |
| for interference immunity | EN 61000-6-2 |
| Operating data |
| Ambient temperature | |
| during operation | -25 ... +70 °C; with natural convection |
| during transport | -40 ... +85 °C |
| during storage | -40 ... +85 °C |
| Environmental category acc. to IEC 60721 | Climate class 3K3; in addition 95% maximum relative humidity, but without condensation |
| Mechanics |
| Type of electrical connection | Plug-in terminals with screwed connection |
| for battery module | +, -: Plug-in terminal with 1 screwed connection each for 0.2 ... 10 mm² |
| Type of connection to system components | Via integrated connector |
| Width of the enclosure | 60 mm |
| Height of the enclosure | 125 mm |
| Depth of the enclosure | 150 mm |
| Required spacing | |
| top | 50 mm |
| bottom | 50 mm |
| left | 0 mm |
| right | 0 mm |
| Net weight | 0.9 kg |
| Product feature of the enclosure housing for side-by-side mounting | Yes |
| Mounting type | Snaps onto DIN rail EN 60715 35x15 |
| Electrical accessories | Battery module BAT8600 |
| Mechanical accessories | Device identification label 20 mm × 7 mm, TI-grey 3RT2900-1SB20 |
| MTBF at 40 °C | 405 763 h |
| Reference code acc. to DIN EN 81346-2 | T |
| Other information | Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) |
| |
