3RK1200-0CD00-0AA2 4E MODULE WITH 3 INPUTS
From SIEMENS
AS-Interface PCB module digital, IP00, 4 DI 4 x inputs for 3-wire sensor for 30-pole male connector socket | |||
General technical data: | |||
Design of the product | AS-Interface communication modules - special integrated solutions | ||
Design of the slave type | standard slave | ||
Type | 4 inputs | ||
I/O configuration | 0 | ||
ID/ID2 code | 0/F | ||
Type of electrical connection of the inputs and outputs | male connector socket | ||
AS interface total current input max | mA | 270 | |
Total current for all inputs and outputs | mA | 200 | |
Protocol is supported AS-interface protocol | Yes | ||
Reference code acc. to DIN 40719 extended according to IEC 204-2 acc. to IEC 750 | A | ||
Reference code acc. to DIN EN 61346-2 | K | ||
Sensor supply: | |||
Type of voltage supply for power supply | using AS-Interface | ||
Input voltage | V | 26.5 ... 31.6 | |
Property of the sensor supply Short-circuit and overload resistant | Yes | ||
Inputs: | |||
Number of digital inputs | 4 | ||
Input circuit | PNP | ||
Type of voltage of the input voltages | DC | ||
Inputs sensor supply | using AS-Interface | ||
Inputs switching voltage | V | 20 ... 30 | |
Outputs: | |||
Number of digital outputs | 0 | ||
Output voltage at DC at 24 V | V | 22.5 ... 24 | |
Display: | |||
display | AS-i: Green Fault: Red Inputs: Yellow | ||
LED status display | AS-i: On, Fault: Off, Status: OK AS-i: On, Fault: On, Status: No data traffic AS-i: Flashes, Fault: On, Status: Zero address AS-i: On, Fault: Flashes, Status: Overload (sensor) | ||
Assignment of data bits | |||
D0 | IN1 | ||
D1 | IN2 | ||
D2 | IN3 | ||
D3 | IN4 | ||
Ambient conditions: | |||
Protection class IP | IP00 | ||
Ambient temperature | |||
during operation | °C | -25 ... +70 | |
during storage | °C | -40 ... +85 | |
Mechanical data: | |||
Width | mm | 75 | |
Height | mm | 9 | |
Depth | mm | 54 | |
Mounting type | using a "Card Edge Board-to-Board-Connector" |