70160-RTT-03 Pumps - 1.24 CID PUMP ASSY
From Eaton
| Feature | Code | Description |
|---|---|---|
| CODE TITLE | ADB | EATON MEDIUM DUTY MANUALLY VARIABLE DISPLACEMENT AXIAL PISTON PUMP |
| DISPLACEMENT | 12 | 20.3 CM3/R [1.24 IN3/R] |
| INPUT SHAFT ROTATION | R | RIGHT HAND ROTATION (CW) |
| VALVE PLATE | 1 | VALVE PLATE- TYPE 1 |
| INPUT SHAFT | E | 9 TOOTH 16/32 PITCH SPLINE, SHAFT EXTENSION 31.7 [1.25] |
| CONTROL SHAFT LOCATION | R | RIGHT SIDE |
| CONTROL SHAFT | D | WITH 15.7 [.62] SQUARE ARM, AND RADIUS 4.83 [.190] LOCKING BOLT GROOVE; 113 [4.45] FROM UNIT CENTERLINE TO CONTROL SHAFT END |
| MAIN PORT LOCATION (A AND B) | 1 | OPPOSITE SIDES |
| MAIN PORT SIZE (A AND B) | 1 | 1.0625-12 UN-2B SAE O-RING PORTS |
| RELIEF VALVE SETTING FOR MAIN PORT A | T | 344.7 BAR [5000 LBF/IN2] |
| RELIEF VALVE SETTING FOR MAIN PORT B | T | 344.7 BAR [5000 LBF/IN2] |
| CHARGE DISP. & SUCTION PORT SIZE (S) | 0 | NO CHARGE PUMP |
| CHARGE RELIEF SETTING & ROUTING | 0 | NO CHARGE RELIEF (REQUIRES EXTERNAL RELIEF SET BETWEEN 6.89 BAR [100 LBF/IN2] AND 20.68 BAR [300 LBF/IN2]) |
| CHARGE SPECIAL FEATURE | 0 | NO SPECIAL CHARGE FEATURE |
| AUXILIARY REAR MOUNT AND OUTPUT SHAFT | C | NO INTEGRAL CHARGE- HORIZONTAL / VERTICAL SAE J744 FLANGE 82-2 (2 BOLT A) 9 TOOTH EXTERNAL 16/32 PITCH SPLINE WITH 31.7 [1.25] SHAFT EXTENSION (COUPLER REQUIRED) |
| SPECIAL FEATURES AUXILIARY MOUNTING | AB | SUPPLY SHAFT COUPLER 9 TOOTH 16/32 PITCH |
| AUX PORT TOP-FRONT (C1) OR BYPASS VALVE | 0 | NO AUXILIARY PORT OR BYPASS VALVE |
| AUX PORT TOP-REAR (C2) | 2 | .750-16 UNF-2B SAE O-RING PORT PLUGGED |
| AUX PORT SIDE (C4 OR C5) (CHG PUMP ONLY) | 0 | NO AUXILIARY PORT |
| CASE DRAIN (D1 AND D2) | A | .750-16 UNF-2B SAE O-RING PORT D1-TOP (D2-BOTTOM PLUGGED) |
| THRU DRAIN FRONT (D4) | 0 | NO THRU DRAIN (D4)-FRONT |
| ADDITIONAL FUNCTIONS | 0 | NO ADDITIONAL FUNCTIONS |
| SPECIAL FEATURES | 00 | NONE |
| PAINT | 0A | RED OXIDE PRIMER PER SPEC 209-13A |
| IDENTIFICATION | 0 | EATON IDENTIFICATION LABEL |
| DESIGN CODE | C | C |
